Tag: open-source

Posted on
by
Ten Open Source RSS News Readers for Smartphones by The Privacy Dad (Welcome to The Privacy Dad's Blog!)
Ten open source RSS news reader apps for smartphones ranked by positive user experience.

The Privacy Dad blog published a good list of open source feed readers for Android. My current set-up is a Miniflux running as a PWA (I am running a Miniflux instance with Pikapods). But before I switched to Miniflux, I was using an open source local feed reader for Android that is not on The Privacy Dad list: Handy Reading. Handy Reading is a fork of the now-unmaintained Flym RSS and is a very nice feed reader. It can extract full text and allows the user to set how often each feed is checked. What sets it apart from similar solutions, however, is that you can save articles from outside your feeds into Handy Reading, making it a quasi read-it-later solution as well. To be sure, it is not as good a read-it-later tool as something like Omnivore, Wallabag or Shiori, but it is a nice addition to an all-around solid local open source feed reader.

Posted on
by
My Tablet - My Computer by Roger Carter
Rather than replace your old, slow computer with a new one, why not buy a Bluetooth keyboard and mouse for your Android tablet instead? This book explains how to set up your tablet to replace your computer, what apps to install, and how to configure your new system. It will not only handle all your home office tasks, it will be much faster and in many respects more capable than your old computer.

I came across a free ebook by Roger Carter on Smashwords about using an Android tablet as a computer (see My Tablet – My Computer). The book is short, running just over 5,000 words. While I do not personally need to use an Android (LineageOS in my case) tablet as a computer (not to mention my 2013 Google Nexus 7 might struggle in some areas), I was curious to see Mr. Carter’s set-up and recommendations. It provides a nice tutorial to setting up an Android tablet to behave like a computer (I was not aware of some of the settings he toggled) and is worth reading if you have a use case for this set-up. Regarding apps, I would personally opt for a different set-up from the perspective of preferring LineageOS (or other similar ROMs) and open source apps to the stock Android suite. For example, because I do most of my writing drafts in markdown, I would rely heavily on Markor as my text editor. But if I needed word processing, my first inclination would be to try the open source Collabora Office. For keeping everything in sync between my devices, I prefer to rely on Syncthing instead of a third-party cloud.

Posted on
by
Hemispheric Views - App Defaults by Robb Knight (defaults.rknight.me)
Hemispheric Views - App Defaults

I was inspired to create an article listing my default apps by a project to collect default app posts on Hemispheric Views. I wrote my default apps article and then made a pull request to have the article included in the Hemispheric Views project. The curator merged my pull request within two hours. I am glad to be included and recommend reading some more of the 266 (as of this posting) articles included to find some interesting new “default app” ideas for your own use (my list is focused on Linux and Android since I run Linux on all of my computers and LineageOS on my phones and tablets). If you have a blog or website, I encourage you to consider writing and submitting your own App Defaults post.

Posted on
by
Show Pages ID (WordPress Plugin) by YYDevelopment (YYDevelopment)
Description Show Pages IDs is a plugin that will show allow you to view the IDs of pages and posts in wordpress. With Show Pages IDs plugin you will be able to views the pages and posts IDs in the top admin menu bar and in the back-end admin panel as well. Show Pages IDs Plugin Features Reveal pages...
⭐⭐⭐⭐⭐

I use YYDevelopment’s free (including of cost) and open source WordPress plugin, Show Pages ID, both here and on The New Leaf Journal. I received a dismissible banner on my plugin page asking for a WordPress review. What about an on-site review? Show Pages ID is a very simple plugin that adds a field to the WordPress admin screen for posts that shows the post’s numerical ID. It also covers pages and custom post types. Not every site needs to know post IDs, but I have at least one plugin on both of my WordPress sites for which I need post IDs. The plugin is lightweight (only adds one option to the site) and written in pure PHP (see details). I recommend it if you need an easy way to see post ID numbers as of December 7, 2023.

Posted on
by

Simple Mobile Tools is a suite of free and open source android apps designed to replace Google’s default apps. However, “free and open source” will likely be a thing of the past after Simple Mobile Tools was acquired by ZippoApps. I used a few Simple Mobile apps back when I wrote a review of F-Droid apps in 2021, but I was fortunately not using any at the time of the ZippoApps news. One of the main contributors to Simple Mobile Tools who was not involved in the decision to sell the suite to an adware company forked the project. The fork looks like a good option for people who want to keep using the Simple Mobile Tools suite. Since I was not using any of the apps, I thought I would note what I use instead. Before continuing, do note that my phone runs LineageOS and I do not use any closed source apps, so your mileage with my set-up may vary if you use a flavor of stock Android.

(Note: If you installed the apps from F-Droid, they will likely just stop receiving updates. If you installed from Google Play, I would strongly recommend looking for alternatives before ZippoApps provides undesired updates, provided you do not desire updates from ZippoApps.

See the suite frozen as of December 6, 2023.

  • Simple Launcher: I use Kiss Launcher because I like that it is search-focused and stays out of the way. However, there are many open source alternatives.
  • Simple Keyboard: I use different open source keyboard also called Simple Keyboard. The Simple Keyboard I use may be too simple for some use cases, but I like my touchscreen keyboard to be as simple as possible (because I want a physical keyboard).
  • Simple Flashlight: I use the LineageOS default flashlight. “I need to install a flashlight app” is not a thought that ever crossed my mind.
  • Simple Calculator: I have the LineageOS default calculator app and I am fairly sure I never used it. There are some fun open source calculators on F-Droid for those who are interested.
  • Simple Camera: I started using the improved default LineageOS camera with LineageOS 20. For those who need something different, I have had good experiences with Open Camera.
  • Simple Voice Recorder: I have the default voice recorder installed and have never used it.
  • Simple Gallery Pro: I used to use Simple Gallery but I now use the LineageOS default. For whatever it is worth, I usually manage my phone’s camera folders from my computer since they are synced with Syncthing.
  • Simple SMS Messenger: I use LineageOS’s default messenger. I previously used QKSMS which is good, although not updated frequently these days.
  • Simple Calendar Pro: I have Etar installed but I do not use it.
  • Simple File Manager Pro: I use Material Files and Ghost Commander, both of which I recommend.
  • Simple Dialer: I use the LineageOS default phone app. However, because I almost never talk on the phone, this app is only used on rare occasions.
  • Simple Draw Pro: I cannot draw on paper, much less on a touchscreen. However, I have seen an open source app called Linwood Butterfly which seems to receive frequent updates for those who are looking for a new drawing app.
  • Simple Clock: You will be shocked to know that I stick with the LineageOS default clock app.
  • Simple Notes Pro: Use Markor and be happy. Markor is a powerful text editor, but I use it most often for saving links in markdown files that I can then sync across all of my devices with Syncthing.
  • Simple Music Player: I have the LineageOS default music app. This is not because I like it, but rather because I have never used a music app on my phone.

There you have it. I fear my suggestions may not be helpful to everyone because of my particular phone set-up and usage, but I hope that the suggestions I was able to offer help point some disappointed Simple Mobile Tools users who are not following the new fork in the right direction. I conclude by offering one non-Simple Mobile Tools suggestion: Take a look at Obtainium for installing open source apps directly from source if you do not source your apps from Google Play Store. I have been using it for a few months and am impressed thus far.

Posted on
by
This buttery, garlicky sausage and rice recipe is simple, cheap, and pretty much to die for by Dale Roll (SoraNews24)
Plus, the stores sometimes even put out recipes, making it even easier to use them! For example, the official Twitter of 7-Eleven’s 7-Premium brand of prepared foods posted the perfect recipe for your busy weekday meal featuring their plump and juicy “Golden Wieners.”

SoraNews24 published an entire article about making a recipe released by 7-Eleven in Japan. I think the recipe looks good (“to die for” is probably excessive, however). But regardless of whether you think 7-Eleven’s sausage-butter-rice dish looks appetizing, I am sure you can join me in praising the convenience store chain for fully embracing open source.